Pronto Mail 

                 The power of Email is for everyone




Installing Pronto Mail:
------------------------

   General
   -------

   Pronto Mail installation will install one of three possible
   editions of our product:

   1. Pronto Family - Requires Windows 95 with 16MB memory or more
   2. Pronto Pro    - Requires Windows 95
   3. Pronto Lite   - Requires Windows 3.x

   The product that will be installed depends on your 
   preference and on the minimal system requirements:

   - If Windows 3.x is installed on your PC, the lite version will be 
     installed.
   - If Windows 95 is installed on your PC, and you have less than 
     16MB of memory, Pronto Pro will be installed.
   - If Windows 95 is installed on your PC, and you have 16MB of 
     memory or more, you can choose to install either Pronto Pro 
     or Pronto Family.

   Note for Windows 3.x users: 

     In the near future, a free 16-Bit version of Pronto Pro will 
     replace Pronto Lite. This version will offer a much improved 
     user interface and the full set of features available in the 
     32-bit editions of Pronto.
     Upon first run, Pronto Lite asks you to fill in a registration 
     form. If you fill-in the registration details appropriately, 
     you will be notified when Pronto Pro 16-bit edition becomes 
     available.

   To Install with MS Windows 3.x (Pronto Lite):
   ---------------------------------------------

   1. Insert your product CD-ROM into the appropriate CD drive.
   2. Open the Program Manager window. 
   3. From the Program Manager main menu, select File, then Run.
      The Run dialog appears.
   4. In the Command Line edit box enter the following text:
      d:\pronto\setup
      Note: if your CD drive letter is different then D:, use
            the right letter instead (for example enter 
            e:\pronto\setup if your CD drive is E:)
   5. Follow the installation instructions.
   6. After the installation is completed, a new program group 
      window will appear, named Pronto Lite.
   7. Click the Pronto icon in this group to start the program
      for the first time.

   To Install with Windows 95:
   ---------------------------

   1. Insert your product CD-ROM into the appropriate CD drive.
      The installation program should start automatically, and 
      you can continue directly with step 4 below. 
      Continue with steps 2,3 only if for some reason the 
      installation program did not start.
   2. On the TaskBar, click start menu and select Run...
   3. In the Open edit box enter the following text:
      d:\pronto\setup
      Note: if your CD drive letter is different then D:, use
            the right letter instead (for example enter 
            e:\pronto\setup if your CD drive is E:)
   4. Follow the installation instructions. 
   5. After the installation is completed a new shortcut with Pronto
      icon appears.
   6. Click the Pronto icon to start the program for the first time.


   First-Time running (Pronto-Pro and Pronto-Family Only)
   ------------------------------------------------------
   Your CD installation pre-configures Pronto with some of the 
   right parameters to connect with your Internet Service Provider.
   When the program is invoked for the first time, it displays 
   a series of dialogs which help you setup the program. 
   The values for the pre-configured parameters will appear already 
   filled-in. It is recommended NOT to change those values unless 
   you are experienced with these settings.

             
  Thank you for using Pronto Products.

  CommTouch Software Inc.
  Web: http://www.commtouch.com